Saturday 15 August 2015

Lumos Solar Charger Specifications

Charger Specifications :

  1.  5V-25V input voltage
  2.  <10W power input (debatable)
  3.  >4000 mA-h battery capacity
  4. MPTT for solar performance improvement
  5.  SOC (state of Charge) indication (Low energy consumption for SOC indication)
  6. Short circuit protection at output
  7. Over voltage protection at input
  8. Protection from over-charge and over-discharge ( all battery protection)
  9. Charge all major USB chargeable devices  ( tables, phones, lights, GPS)
  10. Contact discharging 8KV / Air discharging 12KV (debatable)
  11. Low standby power consumption ( < 4 mW)
  12. 90% charging efficiency ( average over battery charging cycle)
  13. 85% discharging efficiency ( average over battery discharge cycle)
  14. Operating ambient temperature (0-45 Celsius)
  15. 50Kg pressure limit
  16. 500 time rub resistance   
  17. Non-flammable
  18. Connector mating cycles > 1000
  19. Switch press cycles > 3000 and over force protection for the switch (if switch is present in the system)
  20. 3 year of life in normal use
  21. No failure in case of drop from 3.5 feet height (optional)
  22. Water protection for the ports (optional)
  23.  Cost < $12 (for charger unit & cables) for quantity of 10,000 (debatable)

8 comments:

  1. Wonderful content, Which you have shared here. This post is very informative and I liked to see it. eaton vfd

    ReplyDelete
  2. The post you have shared here is really great as it contains some good knowledge which is very useful for me. Thanks for posting it. Keep it up. test and tag perth

    ReplyDelete
  3. I am very grateful that I found some helpful content in this post. After reading it , I think that you have good knowledge. Thanks for posting it. Keep it up. test and tag adelaide 

    ReplyDelete
  4. I am heartily thankful to you that you have shared important and essential information of Test And Tag Adelaide with us. I got some different kind of knowledge from your webpage, and it is very much important for everyone. Thanks

    ReplyDelete
  5. Everything is very open with a really clear explanation of the issues. It was truly informative. Your site is extremely helpful. Thank you for sharing!

    야설
    대딸방
    스포츠마사지
    출장마사지
    바카라사이트

    ReplyDelete
  6. Many thanks for the article, I have a lot of spray lining knowledge but always learn something new. Keep up the good work and thank you again. 룰렛사이트탑

    ReplyDelete
  7. Excellent post. I really enjoy reading and also appreciate your work. This concept is a good way to enhance knowledge. Keep sharing this kind of articles, solar removal service martin county Thank you.

    ReplyDelete
  8. We recommend utilizing a solar charge controller if you utilize a panel with a rated output of more than 5 watts. In fact, a charge controller is an excellent idea in the vast majority of applications since it can avoid overcharging, improve charge quality, and prevent battery drain in low or no-light settings. Blocking diodes are included into certain solar panels to prevent battery drain during low or no light conditions. A charger controller is strongly recommended in most circumstances when a 6-watt or bigger solar panel is installed. In a word, a solar charge controller functions as an on/off switch, allowing electricity to flow when the battery requires it and turning it off when the battery is completely charged.

    What is solar finance

    ReplyDelete